When the rotating plate arrived I was finally able to start constructing the 3D model. After that was greenlit, I ordered the parts such as the rotating plate, the plexiglass dome, enough 3D printing material, LEDs and so on. My idea was therefore a turntable with the signatures on its outer rim and the bus displayed in its center. There was just no way to present those 11 autographs in a visually beautiful manner…
The requirement here was to fit in 11 signatures, so I decided right away against using a normal model case. After drying and cutting the foil I put attachments like mirrors and windshield wipers back on.
So I left everything to dry first and then trimmed it with a scalpel. The foil cannot be cut directly after application – it will tear.Which proved to be very complicated and challenging.
#Bus simulator ps4 windows
This means that I had to draw windows onto the picture myself with the help of a drawing program, but in a way that the position would be just right. The windows of the bus were no longer visible through the foil.I therefore had to adjust the size with multiple repeated test prints. The foil shrinks in the water so that the size did no longer fit on the bus when it is attached.But this as well did not want to work directly. After the reassembly, the first tests with the printed white foil followed. Here I dismantled the bus model because of the design template and painted the body black, which I did by airbrushing. This is why I decided to use the white foil. First tests with the transparent foil on the originally silver colored bus failed, as bright details were not clearly visible due to the transparency. So then… some internet research and ordering the foil, in two versions at once (transparent and white). The scale of the bus was too small and therefore only the second option of using a water transfer foil remained. After receiving the model and a few talks with local advertising printing companies it became clear, however, that this wasn’t possible. The challenge with the bus is which possibilities are there for me at all to put a picture on the model. At the beginning, when I received all the relevant information about the project, I divided it into three parts: The bus.